Description

HOTLINE : 0771919191/0114493135

BRAND : MEGA+
Model : CB-1501M
Touch monitor parameters
The basic parameters

Screen size 15.6″
The liquid crystal screen adopts a new LCD LCD screen
Touch screen resistance touch screen
Screen ratio 4:3
On the then 1000:1
Resolution 1024 x 768/60 Hz
Display color 16.7M
Signal input interface VGA 15 needle d-sub interface
Display brightness 500cd/m2 ambient humidity 35 million response time 5ms
Touch mode pressure sensing backlight life 50000 hours
Touch communication interface USB normal power is less than 25W
Visual Angle h170/170 v16/160 shell size 37cm x 29.5cm x 5.5cm
Point spacing 0.264mm visual dimension 30.3cm x 22.6cm
Frequency: 30-80khz frequency: 56-75hz
Power supply 110~220 volt product certification CE, FCC
Use desktop screen Angle can be adjusted according to user habits (30 °,
160 °)
The advantages are stable and undedicated, the input is flexible, the anti
pollution ability is strong, the high frequency application, the accuracy is
high, the product life is long, conforms to NEMA 4/4x/12 and IP 65
standard
Other properties can be used as a la carte/display product, with a small
volume/full function
Random attachment specification, warranty card, power cord, drive
Compact disc
Material engineering plastic material for shell fuselage
Principle of resistance touch screen technology:
Resistive touch screen is a main part of the surface is very match the
Resistance of the film and display screen, it is a kind of multilayer
Composite films, it with a piece of glass or hard plastic flat as grassroots,
Surface with a layer of transparent metal oxide (ITO indium oxide
Transparent conductive resistance) conductive layer, the above with a
Layer of surface hardening treatment, smooth in rubbing the plastic layer,
Its inner surface is coated with a layer of ITO coating, among them there
Are many small (less than 1/1000 of an inch) of transparent isolation point
Separates two conductive layer of insulation. When the finger touching
The screen, two conductive layers in touch point location had contact,
Controller to detect the contact and to calculate the position (X, Y),
According to simulation the mouse operate.
This is the basic principle of The resistive technology touch screen. The biggest characteristic of Resistive screen is not to be afraid of oil, dust, water.
The latest fourth Generation resistance technology Touch screen is different from other Resistive screens: it is made of glass as the base plate, which makes the Transmittance higher and the reflected refractive index more applicable to Users.
At the same time, evenly coated glass at the bottom of the
Conductive layer of the adsorption on a touch screen electrostatic
Particles through ground uninstall, guarantees the touch positioning more
Accurate, more sensitive, thoroughly remove charged particles drift
Phenomenon caused by the excessive, inaccurate positioning, response is Slow, make it last longer, and have the ability of free maintenance, prevent Scratch degrees have been greatly improved.

Touch display for use Public places bookstore, exhibition hall, gymnasium, restaurant

#pos_monitor #15inch_touch_pos_monitoe #touch_monitor

https://drive.google.com/drive/folders/12HfbfrQqApszDXeyoZIiXHIV57CJ0mVU?usp=sharing